Linux containers started to become more widespread in embedded systems during the last few years. Application portability, ease of configuration, and isolation are all desirable features in edge devices just as in the cloud. To quickly get started with containers on ARM devices, you can download pre-built images like Armbian for the supported boards and install Docker using standard package managers.
If you wish to run all applications in Linux containers, you will probably aim for a lightweight distribution instead of a full featured one. Minimal container operating systems like CoreOS, RancherOS and others were created for this purpose and you can use them on regular VMs.
For IoT devices, there is Ubuntu Core with off-the-shelf Raspberry and Dragonboard support. But if your hardware is not supported or you’re not planning to use the snap package format of Ubuntu, you can always compile your own distribution with Buildroot or Yocto.
In this tutorial, I will show how to build a custom Linux OS with container support for an ARM board and how to deploy some simple apps in containers.
For managing containers, I will use Podman instead of Docker as an experiment. I found during my early tests that starting containers with Docker took ages on my board. But instead of playing around with different container runtimes, I chose to test Podman, so later I can move to Kubernetes or run rootless containers.
First, set up a basic Yocto environment and clone the poky reference distribution repository.
git clone -b thud git://git.yoctoproject.org/poky
Configurations in the Yocto build system are stored in layers. The first layer we need is meta-sunxi, which is the BSP layer for my Allwinner based Orange Pi board, so let’s download this layer.
git clone https://github.com/linux-sunxi/meta-sunxi.git
We also need meta-openembedded, meta-virtualization, meta-security layers to compile Podman and the container runtime.
git clone -b thud git://git.openembedded.org/meta-openembedded && \ git clone -b thud git://git.yoctoproject.org/meta-virtualization && \ git clone -b thud git://git.yoctoproject.org/meta-security
Before adding these layers to the build system, we have to setup the build directory. Run the poky environment setup script which will automatically generate your /build folder. Note that this command will change your working directory.
Now we can set up the configuration files in the build directory. Enable the following layers from the previously cloned repos with the bitbake-layers command, so we don’t have to edit bblayer.conf by hand.
bitbake-layers add-layer ../meta-sunxi/ \ ../meta-openembedded/meta-oe/ \ ../meta-openembedded/meta-filesystems/ \ ../meta-openembedded/meta-python/ \ ../meta-openembedded/meta-networking/ \ ../meta-openembedded/meta-perl/ \ ../meta-virtualization/ \ ../meta-security/
For the time being, I am going to add every customisation to the local.conf file. This file stores the local or user specific configuration. Later we can create a new configuration layer with recipes for this image to store our changes permanently.
First we set the target device in local.conf. I checked the exact
machine name for my board in the BSP layer (meta-sunxi/conf/machine/)
and modified the
MACHINE parameter accordingly.
# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "orange-pi-one"
Linux container isolation is built on kernel features like cgroups and namespaces but the kernel configuration for my board did not enable these by default.
Instead of editing the kernel configuration in the BSP layer, settings
in meta-virtualization can extend our configuration to enable kernel
features to support containers. The meta-virtualization layer implements
this with defining a new
DISTRO_FEATURE. Distro features can enable
functionality across multiple packages. So add this to our local.conf:
DISTRO_FEATURES_append = " virtualization"
Finally select the packages we want to build into the image.
IMAGE_INSTALL_append = " podman podman-compose crun cgroup-lite rng-tools \ procps ca-certificates python3-setuptools \ python3-pyyaml python3-json"
Here is a little explanation for this part:
Now we need to specify the image recipe we want to build. As a starting point I used the core-image-minimal as the smallest default image. Use the bitbake command to start the build.
This image configuration is the reason why we added all these seemingly random packages to the build. It is a minimal default configuration, so we had to add these otherwise essential tools like rngd to the image.
After a few hours hopefully the build completes, and you can find the sd card image in build/tmp/deploy/images
ls -ailh build/tmp/deploy/images/orange-pi-one/core-image-minimal-orange-pi-one-20200310152758.rootfs.sunxi-sdimg
Write this image to an SD card and boot the board with the new image. Get a terminal using a serial port or SSH.
Before starting a container with podman, we have to modify libpod.conf.
root@orange-pi-one:~# vi /etc/containers/libpod.conf
Set crun as a container runtime and use cgroupfs instead of systemd to manage cgroups.
cgroup_manager = "cgroupfs" runtime = "/usr/bin/crun"
Now we can try running our first container.
root@orange-pi-one:~# podman run hello-world Trying to pull docker.io/library/hello-world... Getting image source signatures Copying blob b6206e5d545d done Copying config cfdb1bf11e done Writing manifest to image destination Storing signatures Hello from Docker! ...
With this build, your root partition has very little free space available. If you would like to store your containers and container images on another partition, edit storage.conf.
root@orange-pi-one:~# vi /etc/containers/storage.conf
Point runroot and graphroot locations to your data partition.
# Temporary storage location #runroot = "/var/run/containers/storage" runroot = "/mnt/data/storage" # Primary Read/Write location of container storage #graphroot = "/var/lib/containers/storage" graphroot = "/mnt/data/storage
(Now you can create a new partiton with fdisk and mkfs, then edit your fstab to mount your partition on startup. Or you can use wic to create an sd image with an empty data partition)
podman-compose with a simple configuration. Create a new compose
Define an example service.
version: '2.0' services: hello-world: image: hello-world
And start this configuration.
root@orange-pi-one:~/test# podman-compose up podman pod create --name=test --share net 4dc74923c2314d0ef0379f90e0246fab5d41896ae815ee33287b5e6360c40fac 0 podman create --name=test_hello-world_1 --pod=test -l io.podman.compose.config-hash=123 -l io.podman.compose.project=test -l io.podman.compose.version=0.0.1 -l com.docker.compose.container-number=1 -l com.docker.compose.service=hello-world --add-host hello-world:127.0.0.1 --add-host test_hello-world_1:127.0.0.1 hello-world ea9f6fd6fce3af419d1306b94e9de21f49bb323a870ed053abf4e5a8d9ae1b0c 0 podman start -a test_hello-world_1 Hello from Docker!
In this example, we used Yocto to build a small Linux image from scratch and installed essential packages to get started with containers on an ARM devices. With the lightweight container runtime and the minimal configuration the image still has a significant size (~250MB) but it is a good starting point for testing.
The next steps would be saving this configuration in a separate Yocto layer, but this is a topic for another tutorial.